Welcome to Stemar Equipment and Supply Co.

Your browser isn't java enabled!!! Try Internet Explorer athere


STEMAR WASTE WATER BYPASS /
FULL FLOW-THRU SEWER PLUG
 

Stemar’s Wastewater Bypass is an approved method of diverting live sewer lines while repairing or adding to existing manholes.

Stemar’s Bypass uses gravity with no need for pumps or other expensive machinery. A standard Stemar Bypass has minimal flow reduction. The amount of flow reduction is normally only one pipe size. Wastewater from a 12" (300mm) pipe could be diverted through 10" (250mm) Flex-Hose (heavy duty flexible bypass hose).

Stemar’s Bypass Head (Full Flow-Thru Plug) has an inflatable sleeve and is multi-sized. The Bypass Head is normally designed for use in two or more sizes of pipe. The Bypass Head is galvanized steel with an inflatable sleeve made of black neoprene rubber reinforced with one or more layers of tire cord.

Stemar’s Bypass Head is attached to our Flex-Hose with high torque, stainless steel pipe clamps. Another multi-sized Bypass Head can be attached to the downstream side of the Flex-Hose to completely seal both sides of the manhole. Stemar’s Bypass can accommodate one to several additional lateral connections, if needed.

Stemar’s Flex-Hose is a rubber coated, heavy duty, nylon hose with an enclosed steel helix coil. This design allows the user to shorten and/or bend a 9’ (2700mm) length of Flex-Hose to approximately its length, without losing its shape. Stemar’s Bypass normally comes with 9’ (2700mm) of Flex-Hose. Standard Flex-Hose lengths are: 1’ (300mm), 2’ (600mm), 5’ (1500mm), 9’ (2700mm), and 25’ (6300mm). The Flex-Hose can be coupled together for almost any length or configuration. Standard Flex-Hose internal diameters: 2" (50mm), 4" (100mm), 6" (150mm), 8" (200mm), 10" (250mm), 12" (300MM), 14" (350MM), 18" (450MM), and 24" (600mm).

Stemar’s Flow-Thru Pipe (Light Weight Bypass Pipe) is attached to Stemar’s Bypass Head by bolted flange and is used on Stemar’s larger Bypass’ when a larger flow-thru is needed. Standard Flow-Thru Pipe lengths are 2’ (600mm), 3’ (900mm), 4’ (1200mm), and 5’ (1500mm). Stemar’s Flow-thru Pipe can be flanged together for longer lengths. Standard Flow-Thru Pipe diameters: 27" (700mm), 34" (860mm), 42" (1100mm), and 48" (1200mm).

Stemar’s Bypass comes standard with 5’ to 25’ (1500mm to 6300mm) of inflation hose inside a hollow braid polypro rope. This is attached to the Bypass Head on one end and on the other end is a 5/16" (8mm) safety hook. The hose comes with a standard air tank valve for inflating. This polypro rope/inflation line is used for lifting and lowering smaller Stemar Bypass’ as well as for inflation. The Larger Stemar Bypass’ come with nylon web slings for lifting and lowering.

OPTIONS INCLUDE:

HOSE COLLAR - To join additional lengths of Flex-Hose hose together.

REDUCTION COUPLING - To attach together different diameters of Flex-Hose.

"Y" COUPLING - To allow for incoming lateral connections.

"4 WAY" COUPLING - To allow for multiple incoming lateral connections.

SOLUTIONS - For other than standard sizes to your specific needs, we will provide a solution.

OTHER OPTIONS AVAILABLE, JUST ASK!

Application: Stemar, Inc. waste water by-pass is an approved method for diverting live sewer lines while repairing or adding to existing manholes without the need of pumps.

Features/Options:

Seals multiple line sizes
Standard with 5ft.inflation line (longer lengths on request)
Standard with 9 ft. of flexible hose (different lengths on request)
Standard with one Full Flow-Thru Plug "Head" (Double "Head by-pass available to completely seal both sides)
3-way "Y" and 4-way "cross" couplings available to allow for incoming lateral lines
Couplings available to decrease / increase flex hose diameter size
Couplings available to join multiple hoses together
Rigid pipe available instead of flex hose
Standard sizes from 4" to 72"
Other sizes available
Double head waste water by-pass
10" to 12" "Double Head" By-Pass
 
Double head waste water by-pass bent 90 degrees
10" to 12" "Double Head" By-Pass bent 90 degrees
 
Y by-pass 12 in to 15 in double head with 8 in to 10 in lateral head
"Y" By-Pass 12" to `15" "Double Head" with 8" to 10" Lateral Head
Double head flow through waste water by-pass
"Single Head" (Full Flow-Thru Plug) By-Pass
 
Y Flow thru waste water by-pass
"Y" By-Pass

WASTEWATER BYPASS SPECIFICATIONS

For Pipe  Diameter

Deflated ByPass Size without Hose/Pipe

Approx Weight Lbs.

Standard Hose/Pipe Diameter

Standard
Hose/Pipe
Lengths

Hose/ Pipe Weight Lbs/Ft.

Maximum Pressure PSI

Head Diameter

Head Length

Inflate

Back/Air Back/Water

4" - 6"
(100 - 150mm)

3.25"
(83mm)

13"
(330mm)

5
(2.3kg)

2"
(50mm)

5' & 9'
(150 & 270cm)

0.3
(0.14 kg)

25
(1.7 bar)

10 (0.7 bar)
25' (7.5 meters)

6" - 8"
(150 - 200mm)

5.5"
(139mm)

17"
(432mm)

8
(3.3 kg)

4"
(100mm)

5', 9' & 25'
(150,270 & 635cm)

0.7
(.32 kg)

15
(1.0 bar)

5 (0.34 bar)
13' (4 meters)

8" - 10"
(200 - 250mm)

7.25"
(184mm)

17"
(432mm)

15
(6.8 kg)

6"
(150mm)

5', 9' & 25'
(150,270 & 635cm)

1
(.45 kg)

10
(0.7 bar)

3 (0.34 bar)
8' (2.5 meters)

10" - 12"
(250 - 300mm)

9.25"
(235mm)

17"
(432mm)

17
(7.7 kg)

8"
(200mm)

5' & 9'
(150 & 270cm)

1.3
(.59 kg)

10
(0.7 bar)

3 (0.34 bar)
8' (2.5 meters)

12" - 15"
(300 - 380mm)

11.25"
(286mm)

20"
(508mm)

25
(11.4 kg)

10"
(250mm)

5' & 9'
(150 & 270cm)

1.8
(.82 kg)

10
(0.7 bar)

3 (0.34 bar)
8' (2.5 meters)

15" - 18"
(380 - 450mm)

13.5"
(343mm)

20"
(508mm)

30
(13.6 kg)

12"
(300mm)

5' & 9'
(150 & 270cm)

2.4
(1.1 kg)

10
(0.7 bar)

3 (0.34 bar)
8' (2.5 meters)

18" - 21"
(450 - 500mm)

17.25"
(438mm)

23"
(584mm)

45
(20.5 kg)

14"
(356mm)

5' & 9'
(150 & 270cm)

2.9
(1.3 kg)

10
(0.7 bar)

3 (0.34 bar)
8' (2.5 meters)

18" - 24"
(450 - 600mm)

17.25"
(438mm)

23"
(584mm)

47
(21.4 kg)

14"
(356mm)

5' & 9'
(150 & 270cm)

2.9
(1.3 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

21" - 27"
(500 - 700mm)

20"
(508mm)

18"
(450mm)

55
(25 kg)

18"
(450mm)

5' & 9'
(150 & 270cm)

3.9
(1.8 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

21" - 30"
(500 - 750mm)

20"
(508mm)

28"
(711mm)

80
(36 kg)

18"
(450mm)

5' & 9'
(150 & 270cm)

3.9
(1.8 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

27" - 36"
(700 - 900mm)

26"
(660mm)

34"
(864mm)

150
(68 kg)

24"
(600mm)

5', 9' & 25'
(150, 270, 635cm)

5.5
(2.5 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

30" - 36"
(750 - 900mm)

29"
(737mm)

18"
(450mm)

90
(41 kg)

27"(70cm) Pipe*
18"(45cm) Hose

5' & 9'
(150 & 270cm)

3.9
(1.8 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

39" - 42"
(990 - 1100mm)

38"
(965mm)

24"
((610mm)

135
(61 kg)

34"(86cm) Pipe
24"(60cm) Hose

2', 4', & 5' Pipe
(61, 120, & 152cm)

40
(18 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

39" - 48"
(990 - 1200mm)

38"
(935mm)

27"
(686mm)

195
(89 kg)

34"(86cm) Pipe
24"(60cm) Hose

2', 4', & 5' Pipe
(61, 120, & 152cm)

40
(18 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

48" - 54"
(1200 - 1400mm)

46"
(1168mm)

27"
(686mm)

270
(123 kg)

42" Pipe
(1100mm)

2', 4', & 5' Pipe
(61, 120, & 152cm)

48
(22 kg)

20
(1.4 bar)

3 (0.34 bar)
8' (2.5 meters)

54" - 72"
(1400 - 1800mm)

52"
(1321mm)

43"
(1092mm)

350
(160 kg)

48" Pipe
(1200mm)

3' pipe
(90cm)

55
(25 kg)

60
(4 bar)

3 (0.34 bar)
8' (2.5 meters)

 

*For Pipe lengths - Consult STEMAR



MANUFACTURING AND WHOLESALE CONSTRUCTION EQUIPMENT
353 SOUTH CENTRAL AVENUE, LOS ANGELES, CALIFORNIA 90013
Copyright 1998 Stemar Equipment & Supply Co., Inc.. All rights reserved.
Phone: (213) 625-0185   Fax: (213) 625-0826   Toll Free: (800) 992-0100 in California
E-Mail: info@stemarinc.com